The principle of emulsifying ↓ ♠€machine：

When the emulsifier is working, after the ×↓α×materials are mixed and reacte'✘d in the water pot and oil pot by heating and stiφε±rring, they are sucke™₹±d into the emulsification pot by the va✔Ωcuum pump, and stirred through the ce♠↓♦>nter of the upper part of the e>εmulsification pot. Net hanging on the wall stick↔±∏s the material, so that the scra<'±✔ped material continuously generatesα✔☆ a new interface, and th∞★en through the shearing, compression and fol✔∏'ding of the blade, it is stirred and mixedβ>< to flow to the homogenizer, and t€'σ©he material passes through the ≥♣high-speed rotating cutting wheel an>×♦d the fixed During th ε"e shearing, impacting, turbulent flow and otheα™r processes generated between the cutting sleeve≠'s, the material is cut in the ☆¶♦>shearing seam and quickly broken into particles ¥ of 200um-0.2um. The air bubbles were evacuate≥©∑←d in time. The vacuuming metho∑±d is adopted to prevent the products f•​rom being mixed with air bubbles during the stir§ & ring process, thus ensur→‌βing the production of high-quality produ₩→cts with luster, finφΩ eness and ductility.

The principle of paste making machine：

The paste making machine is usuallyβ®λβ equipped with a main pot and two to three÷€ auxiliary pots, which are produced by a <★βdding materials to the  ₹¶ main pot and adding auxiliary m∑♠∏∑aterials to the auxiliary pots. The main pot of¶♣✘♠ the paste making machine is usua≠★₩lly made of two layers, with spe∑σ₹&cial bright light treatment. T←®his machine adopts an upper disperser, so tΩ&♦σhat the material has no deadφ≥φ ends. The dispersion ti§αme can be arbitrarily seλ‍∑∑t according to different pr∏λoducts. The voltage is 220V, the power ₽♦✔is 0.75KW Shanghai Electri♥÷™"c Motor, and the speed is 290✘®¶★0. r/min, the dispersing machine is mad∞‍≥e with modern German technology  ‌and has a distinctive structure. The >≥≥≠material moves at high speed¥  in the gap between the multi-layer rotor and ♣€©the stator, forming a st&↑Ωδrong hydraulic shear, dispersing the material,₽↓ and at the same time producing centr<≤®•ifugal extrusion, The compre∏↑φ♠hensive interaction forces such as grinding and∏<γ collision make the materials fully ‍÷↕>mixed, stirred and refined to meetπ₽ the satisfactory requirements. Th∞↕δe lid is equipped with an illuminated ♠→ βobservation hole to keep ab←↕reast of the dispersion status   π±of the products in th<¥​™e pot at any time, and itπ∑₹‌ is equipped with a trace material inlet to₹<♣© facilitate the addition of s↑♣pecial flavors. , The operation is convenie‌Ωnt to discharge the material from the bo$£ ☆ttom of the pot, and×∞≤€ it can directly enter the fillingα>σ machine for sub-packaging through the p♣‍ipeline. At the same time, the material is d¥γumped and discharged, whελ©>ich is convenient fo₽±r cleaning.

It can be seen that the working princ¥÷‍iples of the emulsifier and the paste makinσ≤↑g machine are similar, but the differe€←§®nce is that the main function of the emu∏✔÷lsifying machine is emulsification, and the past'< e making machine changes ≤≈​the emulsification to ‌×dispersion.