With the gradual strictness of our packaging ★₹↓and the continuous changes in packaging, people h γλave also put forward higher demands on the ¶• capping machine. The pressure on the ca ©​•pping machine is strictly limited, from s≤✔<imple manual capping to mechani≤€♥cal capping. The automatic ca±₹±×pping, high, medium and low-grade products of d∑∏ifferent levels, meet the needs of customers ​↓☆±of different capping.

Pursue the stability of the equipment and c★≤‍ontinuously improve the automation degree of t™<₹≤he equipment, so that our capping abil&↕₽ity can serve people better. Extend the trou↔γλble-free operation time of our equipment. MaΩ®ke our capping machine more widely ¥★ ✔used in the whole packaging production line. Whe ↔♠n people buy capping machines, t>♦≠hey look for big manufactur"₹≈ers and the quality of the products.

Today, I will summarize 4 common prob₩×lems and solutions of aut↕₹omatic capping machines for you.：

1. The failure of the automatic₩γ switch caused by the dri σ≤ft of the micro switch or the photoel£€ectric switch, such as the fault can adjus¥±↕​t the working position of the posit™÷←ion switch or the photoelectric swit ≈ch, or change the switch.

2. There is no starting current caused b★Ωα∑y the short circuit between the‌λ electric stage winding and the casing and th∏∞e short circuit between the motor wiring and← ₩ the ground wire. On the one hanγ∑d, this fault can check the motor∞​∏π, and at the same time ch₽αeck whether the releva✔™≤→nt wires are loose.

3. If the acceleration time setting of§✘ the capping machine is too shoφ∏↔rt and the overcurrent fΩπ©↓ault during acceleration caused by the electric ÷&shock capacity exceeding λ​the inverter capacity, ×¥≈βthe F001 value can be set to an appropriate len©→gth, and the capacity of tπ∏↔>he motor cannot be changed at w↕★↓ ill.

4. The excessively high voltage during±Ωδ operation caused by the excessive fluct×✘σuation of the power s ♣upply voltage can be eaΩγπsily solved by adding a reactor to the power ←‌input or by appropriately reducing the power ×₽→supply voltage.