During the operation o<★γf the homogeneous emulsifier, if there are abn<€ormal noises or other common faults, the equipme§¶Ωnt should be stopped immediately for inspecti↔ φ§on, and then run after the f∑☆γault is detected. Aftα£∏φer stopping operation, the working chamberπ↓λ♥ and stator and rotor should be clα×₽ean.

For example, the process working c®≤↓ hamber can be equipped with a thermal insu‌• lation layer to cool or heat the mater"®•ial, and the cooling liquid or heat-cond÷↔ucting oil should be injected first when t↔£he machine is turned on. The t"γhermal insulation interla™α✔♣yer with working press↑∞©÷ure ≤ 0.2Mpa needs to be heated or coo≥∑led to normal working temperature wh γen processing has temperature requirements (suΩ∑ch as asphalt), crank the car, and start the mach♣₹$δine.

When the homogeneous emulsifier i&£s used in a flammable and explosive wo∞γrking environment, an explosion-p ∞™>roof motor of the corresponding level should be sβ∑elected.

After the production is completed, the equip♥€ment needs to be cleaned so as to not only maiσ∞β™ntain the working ef←✘₩↑ficiency of the stator and ro↓☆≥tor, but also play the function of protecting theεδ↕ mechanical seal. If necessary, design and ≥♦↕ install a set of ring cleaning equipment.

Depending on the media use♦≠φ§d by the consumer, the inlet and o≠σ←×utlet filters are regularly c↓γ₩leaned to avoid reduced feed volume affe"↓∏cting manufacturing efficiency. The material ∑•® entering the working cβ±hamber must be fluid. Dry powder, agglomera₩♣₩¶te and other materials are not all¶™>owed to directly enter t€×®®he machine equipment. Otherwise, the machine equi$ pment will be damp and d↑©amage the machine equipment.​♣

The homogeneous emulsifier need÷®¶↓s to maintain the stator and rotoα€r regularly. If it is found♦✘ that the wear is too large, the cor↓σΩresponding parts should♦™ be replaced in time to ensure the actual effe ↑αct of dispersion and emulsification.

When liquid leakage is found on the shaft dur✔ ing operation, it is necessary to a±∏"αdjust the mechanical seal pressure after☆₽ stopping the operation of the equipmen®​​→t.

Before using this machine and equ±¶✔ipment, corresponding safety pr∑α♣oduction operation p₽φ ₹rocedures should be formulated to ensure the safe®®♣ty of operators and equipment. Electri¶©cal control system consum÷&‌ers should set up a safety protection system, an©↔₽d the electric motor should play a safe>↑₩ and reliable grounding device.

The above are all thγ↔‌e precautions that need to be paid±≤® attention to when using the homogeneous em≤§ulsifying machine to process materials. I hop​'αe that after reading it, it will be helpful ∞₩to everyone! The equ↑δ₽ipment of the homogeneous emulsifier ♣φβ itself is a very advantageous equipment for proc₹≈essing raw materials, but everyone still ca&>≈•n't get away with it∑≥. It is necessary to repair the homog¶♥eneous emulsifier in peacetime, and at the sameδ÷♣ time pay attention to the operation meth↓δod, so that it can be re∑¶♠₽asonably extended. The lifes∏♥pan of the homogenizer!

Shanghai Sanhuai Internationπ"al Trade Co., Ltd. is✔± mainly engaged in theφ‍ production and manufacture of mechanical p★§≠≠roducts, focusing on the dev≈§☆elopment and production of various mechanical♠& products, mainly producin‌¥♦€g daily chemical machinery, phar✘λα₩maceutical machinery, packaging machinery∏∏≥$, food machinery and various stainles >‍λs steel products.