With the gradual strictness✔∏π& of our packaging and the continuous change o ∑'f packaging, we have also clearly put forwar↕↑¶d higher requirements for the capδ↕₩ping machine, and the®± working pressure of the capping machine i'±↑s strict. Caps, to automatic capping of mec<∏hanical equipment, hiε™± gh, medium and low gears and other produc₽®↑πts of different levels, to m​‍λ'eet the customer satisfaction of different capp₹ ↔εing. Screw caps on glass↔λ bottles of different materials.

Pursue the perfect stability of machinδπ♥→ery and equipment, and develop the automation t€'≈echnology level of machinery and equipment, so t↓&÷hat our capping ability can serve ever₩π§yone more. Increase the trouble-free control ₩¶ Ωtime of our machinery♥£ and equipment. Make our capping mach✘π€✔ines more widely use€¥d on the strip packaging line. When you buy a &±★capping machine, you choose a large manufactu↔‌≥rer, and you are optimistic about the ♥σquality of the product.

Today, I summarize 4 c↓εδommon problems and solutions of automatic cap¥β☆ping machines for eveφ↔∏ryone：

1. The ineffectiveness ÷​of the control switch caused by♥ £‌ the drift of the toggle switch×γ‍♠ or the photoelectric ​≥switch during operation, such ∑≈≈a common fault can adju≈✔st the working part of the♦α★≈ power switch or the photo∞¥£electric switch, or replace the₩÷÷ power switch.

2. Electric stage windings and short circuit f↓©∞λaults of the casing and the runn​∞ing current caused by the short ciδ‍±≠rcuit faults of electrical wiri∏₹ng and wire connecto "₽rs. This common fault can detect th★§♣¶e motor on the one handσ , and check whether the releε↓☆∏vant wires are loose on the other hand.♣γ∞

3. The acceleration time setting of the cap♠★ping machine is too ✔'short and the high-voltage electric shocδ∏↔k volume exceeds the≤★ soft starter volume. The com£♠☆mon fault of the overc→→urrent during acceleration can incrπ₹★ease the F001 value setting ✔γtime moderately, and the electric idea  ♠★ cannot be changed casually. volume.

4. The working voltage i∞​©→s too high during the operation caused by thβ$e excessive change of the power supp→✔♦ly voltage, which can be easily dealt with b₩γy adding a series reactor ‌×to the switching power supply, or π‌by reducing the power supply volt↔₹≠age moderately.